Jigen eRook II Driver - 10° - 198g - Head Only - New

$500.00
Earn points with our exclusive TSG Club
Refunds up to 30 days
Secure Payments
Customer Service 24/7

INVENTORY ITEM

- Jigen eRook II Driver - 10° - 198g - Head Only - New

- NO HEADCOVER

- CONDITION: NEW

Introducing Jigen eRook II Driver that follows the straightness of the first eRook "RK55z" and pursues further flight distance.

The straight-line performance of the original driver was achieved by reducing the gear effect of the flat face. The face has a trampoline effect on the entire face due to the face being close to a flat surface (bulge & roll 14 inches). In combination with the elongation performance peculiar to titanium material, the face is bent and the flight distance is created as a repulsion. However, Both a golfer with an average head speed and a golfer with a fast head speed will get the benefits, when it hits, the bending of the face became excessive and the backspin tended to increase slightly.

TECHNOLOGY

Symmetry Wing Rib (SWR)

wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==

Produces stronger straightness by transmitting impact energy to the ball without loss

The ball speed is improved by transmitting impact energy to the ball without loss due to the effect of the new structure "Symmetry Wing Rib" in which the ribs are arranged symmetrically.

In addition, since the symmetrical ribs maintain the balance of the center of gravity of the head, it also has the effect of stabilizing the behavior of the head, making it easier to catch the ball with the core.

New structure "Crown sole integrated molded carbon"

wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==

Spin reduction by lowering the center of gravity

The excess weight created by adopting a carbon material with a light specific gravity at the rear of the head is distributed to the sole weight. Backspin is reduced by lowering the center of gravity. In addition, a new structure that places the adjustable weight at the bottom of the sole has realized a lower center of gravity.

Variable center of gravity driver

wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==

Customize the position of the center of gravity to your liking

Normally, titanium is used for the saucer of the screw, but carbon is used for eRook II. By reducing the weight while maintaining the same strength as titanium by the latest technology, the effect of the adjustable weights installed in 4 places can be maximized.

Adopted "Ti-180" on the face

Maximum resilience performance

The unique face uneven thickness design of the new material "Ti-180" improves the resilience performance when hitting off-center and suppresses variations in flight distance.

VARIABLE ADJUST SYSTEM

It is also worth noting that the ballistic adjustment sleeve was adopted. The loft angle is 8.5 degrees to 11.5 degrees, the lie angle is 59 degrees to 61 degrees, the face angle is hook 0.5 degrees to slice 1.5 degrees, and each combination can be selected from 8 positions.

Jigen eRook 2 Driver

TSG Clubworks

CUSTOMIZE YOUR PURCHASE WITH PROFESSIONAL INSTALLATION

Learn More

Shop by Brand

BROWSE THROUGH OTHER BRANDS.

Shop now

Ask Us a Question

ADVICE YOU CAN TRUST CONTACT OUR EXPERTS.

Contact Us